Home / Services / Washing Machine Repair
Automatic washing machine repair in Lahore
Front-load and top-load automatic machines repaired at your home, usually the same day.
7,000+
Complaints resolved
150+
Certified technicians
Same day
Home visits across Lahore
14+
Brands repaired
Overview
Washing machine repair at your home in Lahore
A washing machine that stops mid-cycle leaves a full drum of wet clothes. Our technicians repair fully automatic front-load and top-load machines of every major brand, including inverter direct-drive models. Most faults are fixed in one visit because we carry common parts such as drain pumps, inlet valves and door locks.
Common problems
Common washing machine problems we fix
Each card shows the problem and its usual cause. Our technician confirms the real fault at your home before any work starts.
Not draining
Blocked filter or failed drain pump
Not spinning
Unbalanced load, belt, motor or carbon brushes
Water not filling
Inlet valve, low pressure or pressure switch
Door won't open or lock
Door lock assembly or handle
Loud noise while spinning
Drum bearings, shock absorbers
Error code on display
Sensor, PCB or wiring fault
Leaking water
Door gasket, hose or detergent drawer
Not turning on
Power supply, fuse or control board
What we do
What our technicians do
- Drain pump and filter service
- Inlet valve and pressure switch repair
- Motor, belt and carbon brush replacement
- Drum bearing and seal replacement
- PCB / control board repair
- Door lock and gasket replacement
- Installation, levelling and shifting
How it works
From your call to a working washing machine
1. Book
Call, WhatsApp or fill the form. Tell us the brand and the problem.
2. Diagnosis at home
A certified technician visits, usually the same day, and finds the fault.
3. Price first
You hear the repair cost before any work starts.
4. Repair and warranty
The repair is tested in front of you and covered by company warranty.
Complete guide
Automatic washing machine repair in Lahore: a complete guide
Why automatic washing machines break down in Lahore
Most washing machine faults we see in Lahore come from three local conditions: hard groundwater, unstable voltage and heavy daily use in large households. Hard water leaves limescale on the heating element, inlet valve and pressure hose. Voltage fluctuations and load-shedding stress the control board (PCB) and the motor. And a machine that runs two or three loads a day wears its drum bearings, belt and door seal faster than the manufacturer’s test cycle assumed.
The good news is that most of these faults are repairable at home in one visit, and a correctly repaired machine usually runs for years. Replacing a washing machine because of a drain pump or a door lock is rarely necessary.
Common washing machine problems and what causes them
Machine is not draining
The most common call we get. Usually the drain filter at the bottom front is blocked with lint, hair, coins or hair clips. If the filter is clean, the drain pump motor has failed or the drain hose is kinked behind the machine.
Drum is not spinning
A machine will refuse to spin if the load is unbalanced or if water hasn’t drained. If both are fine, the cause is often a worn belt or carbon brushes on older top-load and front-load motors, or a fault in the motor or PCB on inverter direct-drive models.
Water is not filling
Low water pressure from the overhead tank, a clogged inlet mesh, or a failed inlet valve. In areas with low tank height, pressure is often the real problem.
Error code on the display
Every brand uses its own codes for drain, door, water supply, unbalance and motor faults. Note the exact code and send it to us on WhatsApp. It tells our technician which parts to bring.
Loud noise during spin
Grinding or a jet-engine sound usually means worn drum bearings. Banging can be broken shock absorbers, or on a new machine, transit bolts that were never removed.
Water leaking on the floor
A torn door gasket, a loose hose clamp, a cracked detergent drawer or a leaking pump seal.
How our washing machine repair visit works
- You book by form, call or WhatsApp with the brand, model if you know it, and the symptom.
- Diagnosis at home. The technician runs a test cycle, reads any error code and checks the drain, inlet, door lock, motor and board.
- Price before work. You hear the exact fault and the full repair cost. If you decide not to repair, you pay only the Rs 1,000 visit charge.
- Repair and test. Parts are replaced, the machine runs a full cycle in front of you, and the company warranty applies.
Front-load, top-load and inverter machines
Front-load machines are more efficient but more sensitive: the door seal, drain filter and bearings need attention. Top-load automatics are simpler to service, but their lid lock and balance sensors cause frequent errors. Inverter direct-drive machines have no belt and fewer moving parts, but their motor control board must be diagnosed correctly before replacement, because a failed sensor can look like a failed board.
Our technicians repair all three types for Haier, Dawlance, LG, Samsung, Orient, PEL, Bosch, Siemens, Kenwood and other brands sold in Pakistan.
What affects the repair cost
The cost depends on the part that failed, not on the brand name. A drain filter clean is quick; a drain pump, inlet valve or door lock is a moderate part replacement; bearings, motors and PCBs are the larger jobs. Inverter boards cost more than conventional ones. You always get the full figure before any work begins, so there are no surprises.
Keep your washing machine running longer
- Clean the drain filter every 2–3 months. In Lahore’s hard water, this alone prevents most drain errors.
- Use the right detergent quantity. Too much foam strains the pump and leaves residue in the seal.
- Leave the door open after washing so the gasket dries and doesn’t smell or grow mould.
- Use a stabiliser or surge protector in areas with frequent voltage drops.
- Don’t overload the drum, and spread heavy items like blankets evenly.
- Run a hot drum-clean cycle with descaler once a month.
Pricing
Visit charge and warranty
Rs 1,000 visit charge
Charged only if you decide not to get the repair done after diagnosis.
Company warranty
When we complete the repair, the warranty provided by the company applies.
Same-day visit
Most bookings in Lahore are visited the same day.
FAQ
Washing machine repair: frequently asked questions
Can you repair my washing machine at home?
Yes. Almost all washing machine repairs, including drain pump, inlet valve, door lock, bearing and PCB work, are done at your home anywhere in Lahore.
How long does a washing machine repair take?
Most repairs are finished in one visit of 1–2 hours. If a specific part has to be ordered, we tell you the expected time before starting.
Is it worth repairing an old washing machine?
Usually yes. Drain, inlet, door and belt faults are inexpensive compared with a new machine. If a repair isn't worth it, for example a cracked drum on a very old model, our technician will tell you honestly.
Do you repair inverter direct-drive machines?
Yes. We diagnose and repair inverter motors, sensors and control boards on LG, Samsung, Haier, Dawlance and other inverter models.
Brands
Washing Machine Repair for all major brands
Appliance not working right now?
Call or WhatsApp and a technician can be on the way today.